| Model | HD-VPM37 | ||
| Working pressure: | 8bar | 10bar | 12bar |
| Air Delivery (m³/min) | 6.3 | 5.6 | 4.5 |
| Air Delivery (CFM) | 223 | 198 | 159 |
| Motor power | 37KW/50HP | ||
| Power voltage: | 380V/50hz/3phase (different voltage is available) | ||
| Compressor type: | Permanent Magnet Variable Frequency Screw Air Compressor | ||
| Cooling Mode | Air cooling | ||
| Starting mode | Variable Frequency Start | ||
| Ambient temperature | -5℃ ~ +45℃ | ||
| Discharge temperature | ≤ Ambient temperature+15℃ | ||
| Dimension (mm) | 1200*1000*1400 | ||
| Product display: |


| Product advantage: |
1. Fast heat dissipation and prolong life.
2.Large rotor, low speed to energy-saving host, saving electricity.
3. The voltage adaptability of the AC power supply is strong
4. Permanent magnet motor has high performance permanent Magnet.
Installation of laboratory air compressor with dryer
The air compressor used in the laboratory is equipped with a dryer with higher air quality, but the dryer also needs to be installed in a suitable position. To avoid freezing of the condensate, the room temperature should not be lower than 2°C; for refrigerated dryers, The room temperature should not be higher than 45°C. high power compressor
For adsorption dryers, depending on the type of structure, the ambient temperature is allowed to be between 40°C and 60°C.
When maintenance may be required, the installation site has enough space for maintenance and operation personnel (generally applicable!). For larger refrigerated dryers, shell-and-tube (ie tube bundle) heat exchangers are used. It should be noted here that in order to facilitate cleaning and inspection, the tube speed connection method should be convenient for maintenance and operation, and the tube speed should be able to be pulled out. For the adsorption dryer with thermal regeneration type, pay attention before installation: the height of the machine room is also sufficient The electric heating rod can be replaced. high power compressor
As long as the allowable load on the floor is not exceeded, the compressed air dryer can be installed without a large foundation project.
To facilitate maintenance, it is recommended to install a bypass pipe with a shut-off valve. In this way, the dryer is easy to come out of the net without compressing the air supply is interrupted. high power compressor
| Company introduction |

| Production Capability |

| Corporate Qualifications |


| Global exhibition & Training |

| Packing and delivery |

Hot Tags: high power compressor, China, manufacturers, suppliers, factory, customized, wholesale, in stock, Variable Frequency Direct Driven Screw Compressor, Variable Frequency Screw Air Compressor, Hande screw compressor, VFD Three phase Motor Compressor, Energy Saving VSD Air Compressor, Energy Saving Screw Air Compressor













