video
Compressor Equipment

Compressor Equipment

37KW 50HP Permanent magnet VSD screw air compressor
Power: 37kw/50hp
Working pressure: 8bar - 12bar
Air delivery: 6.2m³/min (219cfm)

Product Introduction
ModelHD-VPM37
Working pressure:8bar10bar12bar
Air Delivery (m³/min)6.35.64.5
Air Delivery (CFM)223 198 159
Motor power37KW/50HP
Power voltage:380V/50hz/3phase (different voltage is available)
Compressor type:Permanent Magnet Variable Frequency Screw Air Compressor
Cooling ModeAir cooling
Starting modeVariable Frequency Start
Ambient temperature-5℃ ~ +45℃
Discharge temperature≤ Ambient temperature+15℃
Dimension (mm)1200*1000*1400

Product display:

47


Product advantage:

Model: HD-VPM37 pls feel free to contact us for inquiry.

50 hp compressor equipment Features

1. Low speed with big rotor

2. Stainless steel pipe

3. Efficient motor

4. Coupling transmission

5. Intelligent microcomputer control system

6. Electric control panel

7. Pressure maintenance valve

8. Integral intake valve

9. Host and motor transmission

50 hp compressor equipment, pls feel free to contact us for inquiry.

What are the common faults of screw compressor and how to deal with them?

Answer: screw compressor belongs to positive displacement compressor, which is composed of active rotor and driven rotor meshing with each other, body and a pair of synchronous gears. Therefore, common faults of screw compressor are as follows:

1) The bearing is burnt out. The bearing is burnt out due to foreign matter entering the oil system, lower oil pressure, deterioration of oil quality and other reasons. The main treatment methods are: check the oil supply system; Clean the oil filter, oil cooler cooling pipe; Check and adjust the oil pressure regulating valve; Test the quality of the oil, the quality is not good should be changed; Check and treat the leak.

2) Rotor burnout. Compression media system into a foreign body, or due to high suction medium temperature, compression ratio rise and other reasons caused by the rotor temperature rise, rotor cooling oil temperature rise, poor assembly of parts, shell deformation and other reasons can cause the burnout of the rotor. The main treatment methods are: check the air system; Clean the intercooler; Check the cooling water of cooler and water jacket; Cleaning oil cooler; Inspect the nozzle and passage of the oil cooler.

3) Abnormal vibration sound. Shaft shaking or poor shaft to take over and other causes of vibration, abnormal sound. Treatment methods often require disassembly checks. 50 hp compressor equipment

Company introduction

01

Production Capability

3.0

Corporate Qualifications

Global exhibition & Training

Packing and delivery

(1)

Hot Tags: compressor equipment, China, manufacturers, suppliers, factory, customized, wholesale, in stock, Direct Driving Screw Air Compressor, Variable Frequency Direct Driven Screw Compressor, Frequency Air Compressor, 10bar Vsd Screw Air Compressor, VFD Three phase Motor Compressor, VFD Screw Compressor 37kw

Send Inquiry

whatsapp

Phone

E-mail

Inquiry

Bag