Small Rotary Screw Air Compressor

1.Oil cooling high efficiency permanent magnet motor.

2.Insulation grade F, protection grade IP54,adapt to the high dusty environment. IE4 Efficiency motor efficiency.

3.Max.RPM 1500,low noise, high efficiency, better life-span.

4.Split design, easy maintenance. Easy for installation and service.

5.Without gearbox design, motor is connected directly with rotor through the coupling, high transmission efficiency.

6.Low temperature rise, independent cooling fan design, so that the motor cooling is not affected by the speed regulation.

7.With PT100 temperature protection switch to avoid high temperature degaussing.

8.Large speed range, high precision and large adjustment range.

9.Premium Magnetic material resist more than 180oC temp.

10.Fantastic Energy Saving, save up to more than 30-40%.

What should be paid attention to when installing the filter of screw air compressor?

The small rotary screw air compressor filter plays the most important role in the air compressor system to filter moisture and impurities. If we install it improperly, it will affect the quality of the compressed gas. In order to ensure the quality of the compressed gas, we are installing What do you need to pay attention to?

1. Before installation, we should carefully read the product manual and determine the installation location of the product; the precise oil removal and deodorization filter should be equipped with the corresponding dry filter.

2. The general installation position of the precision filter is the outlet end of the air storage tank of the small rotary screw air compressor, and the effect is better at the position where the temperature of the compressed air is close to the outside temperature.

3. Note that the interface of the small rotary screw air compressor filter is pipe thread or flange, and the connection should maintain its sealing performance to avoid dew point deviation caused by pinhole leakage. Be sure to keep the filter installed vertically, and there should be enough space under the filter to facilitate subsequent maintenance of the filter and automatic drain valve.

4. In order to facilitate maintenance, it is not necessary to cut off the air system of the screw air compressor, but the filter can be isolated from the system and decompressed. At the same time, it should be ensured that a vent valve is installed between the two isolation valves to reduce the pressure in the pipeline to atmospheric pressure during maintenance. If some applications do not allow the use of compressed air that has not passed the filter, a second filter should be installed on the bypass line.

Hot Tags: small rotary screw air compressor, China, manufacturers, suppliers, factory, customized, wholesale, in stock, double stage reciprocating air compressor, 5 hp rotary screw air compressor, compressor in industry, Compression Air Compressor, 15 hp rotary screw air compressor with dryer, two stage screw compressor