Many air compressor users ignored the importance of the air compressor room design, they think that the air compressor as long as the arrangement installed there is no problem on the line, but later they appreciate the air compressor room design unreasonable results.Heat dissipation in air compressor room is not good in summer, high temperature of air compressor occurs frequently;Air compressor maintenance is not convenient;Air compressor waste heat recovery engineer construction is not convenient, so we have to ensure that the air compressor room air compressor home design is reasonable.If you are an engineer, what will you remind your users to pay attention to when designing air compressor room?
1, air pressure room design, to understand the air pressure room design rules and matters needing attention.
2. Choose a place with low relative humidity, little dust, clean air and good ventilation.If the ambient temperature is too high (more than 45℃), it is recommended to take cooling measures (such as avoiding direct sunlight, opening doors and Windows, etc.) to avoid unnecessary high temperature shutdown;If the ambient temperature is low (less than 0℃), the freezing point of the lubricating oil must be controlled above the ambient temperature.Think about low temperatures not only in summer, but also in winter, and think about it in the long run.
3. If the factory environment is poor and there is a lot of dust, a ventilation duct should be installed to guide the air inlet to a place with clean air.The installation of the duct must be convenient for disassembly and maintenance. The installation size should refer to the external size of the air compressor.
4. The air compressor shall keep enough space around it for other parts to enter and exit, and the distance between the air compressor and the wall shall be at least 1500mm.Had better have hoisting equipment.The air compressor is more than 1500mm away from the top space.
In short, the design of the air pressure room from you to meet the demand for gas, and can not be strictly in accordance with the book knowledge.But the basic considerations we should understand and grasp, and apply to the actual design of air compressor room.