For example, pharmaceutical manufacturers, toy factories, etc., which require high requirements for compressed air, may even need to deodorize and disinfect compressed air before they can be used. The difference between returning to the air compressor after processing equipment, installing and not installing these equipment is that the moisture content of the compressed air without the post-processing equipment installed at normal temperature is about 20%-30%, and the compressed air after installing these after-treatment equipment The water content will drop to about 0.01%~1%.
With good quality equipment, the water content will be reduced to a lower or high standard compressed air without water. If the requirements for compressed air are not high, the air compressor is used for an average of 10 hours per day. It is recommended to discharge the water in the gas tank and the precision oil mist filter every 3 days or so, which will reduce the water content of the compressed air. If you use it for 24 hours a day, it is recommended to discharge it once a day. It can also be installed with equipment such as drains to automatically discharge water. Regular air compressor maintenance can also reduce water content!
