Silent Direct Driven Permanent Magnet Variable Frequency 7.5kw -22kw 8/10 Bar 24-130 Cfm Small Type Single Screw Air Compressor for Industrial Factory

After months of hard observation, research and testing, our Oil-gas Separator, PM Type Rotary Screw Compressor, 1 Year Warranty Air Compressor 37kw can stand the test of the market. Friends both at home and abroad are warmly welcome to establish everlasting business relations with us. With the further deepening of the construction of market economy, our company has also set new goals and requirements for itself. While expanding the domestic market, we aim at the international market. Over the years, with your care and support, we have grown steadily and always adhere to the purpose of 'focusing on quality and efficiency, being honest and trustworthy'.

1. Fast heat dissipation and prolong life.

2. Large-aperture cooling holes.

3. Energy saving air inlet control system.

4. Noise reduction.

5. Adopt high efficiency oil-air separator.

Disassembly and assembly diagram of air compressor coupling

About the disassembly and assembly method of the screw air compressor coupling.

First remove the cap screws on the flexible element, remove the flexible element; loosen all the taper sleeve mounting screws, take out one or two of them, lubricate the threads and the tips of the countersunk screws with lubricating oil, and then Insert it into the ejection hole of the cone sleeve. Tighten the screws alternately until the taper sleeve is loose in the sleeve and moves freely on the shaft. Remove the shaft sleeve and taper sleeve from the shaft. air compressor lubricant

Remove the protective layer on the inner hole, the outer side of the cone sleeve and the cone hole of the shaft sleeve. After ensuring that the mating cone surfaces have been completely cleaned of oil and dirt, put the cone into the shaft sleeve.

Lubricate the threads on the shaft sleeve and the tip and threads of the screw with a little oil, and gently put the screw into the threaded hole of the shaft sleeve.

Clean the main shaft and the retaining ring, put the retaining ring on the shaft, and flatten the bearing ring. Install the flat key. First install a secondary shaft sleeve and taper sleeve on the shaft as a whole, put the taper sleeve compression ring on the main shaft, and turn the ring end bolt right to make the retaining ring, taper sleeve and bearing ring press against each other without gap. Note: The taper sleeve should be tightened on the shaft first, and then the sleeve should be gently pulled onto the taper sleeve. air compressor lubricant

Use the hexagonal wrench to tighten the screws alternately until the specified torque is reached. Install the other auxiliary shaft sleeve and taper sleeve on the motor shaft and keep them loose for adjustment; put half of the flexible element around the shaft sleeve and fix it with self-locking cap screws. The flexible element determines the motor end The position of the shaft sleeve, and then fix the motor end shaft sleeve according to step (4). Install the other half of the flexible element, and tighten all cap screws to the specified torque. air compressor lubricant

Note: After running for a period of time under the load of the screw air compressor, stop the machine to check the tightness of the screws. To ensure safe operation!!!

High quality and short delivery time are the sharp tools for our company to win over other competitors in the Silent Direct Driven Permanent Magnet Variable Frequency 7.5kw -22kw 8/10 Bar 24-130 Cfm Small Type Single Screw Air Compressor for Industrial Factory market. Our corporate goal is to strive to solve all the needs of our customers. Customers are the focus of our attention, and achieving customer satisfaction is our aim. We are full of enthusiasm and sincerely hope to cooperate with our customers, go hand in hand, and create a better future!

Hot Tags: air compressor lubricant, China, manufacturers, suppliers, factory, customized, wholesale, in stock, Oil-gas Separator, Screw Drive Compressor 30kw Variable, Screw Air Compressor 30hp, Variable Frequency Direct Driven Screw Compressor, 15kw PM Models Screw Air Compressor, Small Belt Drive Screw Compressor 7.5kw