8bar Direct Driving Rotary Screw Air Compressor for Industry

8bar Direct Driving Rotary Screw Air Compressor for Industry

Variable frequency air compressor and fan motor pump power saving, according to the load change, control the input voltage frequency, it can maintain the stability of pressure, flow, temperature and other parameters, thus greatly improving the performance of the compressor. Specifications:...

Product Introduction

We pursue the management tenet of 'Quality is remarkable, Company is supreme, Name is first', and will sincerely create and share success with all clientele for 15kw PM Models Screw Air Compressor, 10bar Vsd Screw Air Compressor, Three-coil Motor Energy Saving Air Compressors. The company's system is the crystallization of collective wisdom, the code of conduct of every employee, and the basis of effective management. We can not only deliver goods quickly, but also respond to the market demand quickly, shorten the product launch cycle to adapt to the increasingly fierce market competition.

ModelHD-37
Working pressure:8bar10bar12bar
Air Delivery (m³/min)6.25.255
Air Delivery (CFM)219186177
Motor power37KW/50HP
Power voltage:380V/50hz/3phase (different voltage is available)
Compressor type:Fixed Speed Rotary Screw Air Compressor
Cooling ModeAir cooling
Starting modeStar-delta Start
Ambient temperature-5℃ ~ +45℃
Discharge temperature≤ Ambient temperature+15℃
Dimension (mm)1500*1000*1330
Product display:


Product advantage:

1. Reduce impact and operate reliably

2. Constant voltage power saving

3. The voltage adaptability of the AC power supply is strong

4. Low noise

Factors and control methods for the formation of carbon deposits in air compressors

The main factors for the formation of carbon deposits

1. High temperature: High temperature is a decisive factor for the oxidation and deterioration of lubricating oil. The higher the temperature, the faster the oxidation rate, and the greater the possibility of carbon deposits;

2. Pressure: After the air is compressed by an air compressor, the pressure increases and the oxygen concentration increases, which increases the oxidation rate of the oil and the possibility of formation of carbon deposits;

3. Metal catalysis: Metal has a positive catalytic effect on the oxidation reaction, which will accelerate the progress of the reaction;

4. Type of air compressor oil: The quality and amount of air compressor oil will affect the formation of carbon deposits to varying degrees. If mineral air compressor oil is used, the unsaturated components in the base oil are more likely to form carbon deposits. tendency.

Air compressor explosion accidents are mostly caused by the accumulation of carbon deposits. Carbon deposits are high-temperature products, but they will ignite spontaneously at high temperatures. Usually the spontaneous combustion temperature of carbon deposits is around 180°C, and the outlet temperature of air compressors is generally not higher than 160°C. Therefore, carbon deposits will not be ignited under normal operation. However, when some failures of the air compressor appear at momentary high temperature or high pressure, the temperature in the air compressor rises sharply, causing spontaneous combustion of carbon deposits, causing the oil in the carbon deposits to aporize rapidly. When the vaporized oil and gas and compressed air contain high concentrations of oxygen When high temperature exists at the same time, it will cause the compressor to explode and cause an accident. best deal on air compressor

Control of Carbon Deposit in Oil Sludge of Air Compressor

Aiming at the generation mechanism of harmful substances such as carbon deposits in air compressor sludge, the following effective measures can be taken to maintain good working conditions of the

air compressor:

1. Choose clean and high-quality air compressor oil, and replace the air compressor oil regularly according to maintenance requirements. According to the operating conditions and conditions, you can choose the air compressor oil of the V and IV synthetic oil formulations, at least you must use the air compressor oil based on the III highly refined hydrocarbon oil to avoid the use of insufficient saturation and impurities More I/II mineral oils. best deal on air compressor

2. Choose high-quality maintenance parts and materials, and replace them regularly according to maintenance requirements. High-quality and efficient use of oil, oil filter, air filter, can effectively filter external and internal pollution sources, to ensure the normal operation of the air compressor.

3. Maintaining normal working temperature and working pressure and ensuring effective ventilation of the air compressor station is a way to get twice the result with half the effort.

4. Adopt auxiliary cleaning method to keep the compressor clean, choose mature online cleaning fluid, and clean the air compressor regularly, which can keep the rotor and oil circuit of the machine head clean and prevent problems before they happen. best deal on air compressor

Company introduction

01

Production Capability

3.0

Corporate Qualifications

Global exhibition & Training

Packing and delivery

(1)

Our company insists on reducing the defective rate of our products, so that our customers can get real practical 8bar Direct Driving Rotary Screw Air Compressor for Industry. We are determined to build a large-scale enterprise with industrial scale, scientific management, modern production, and international standards. We are committed to realizing the great vision of green development and guarding the green mountains and common earth home.

Hot Tags: 10 bar air compressor price, China, manufacturers, suppliers, factory, customized, wholesale, in stock, Two Stage Screw Air Compressor, 30hp22kw Screw-type Air Compressor, 7-13 Bar Middle Pressure Screw Compressor, PM Variable Frequency Screw Air Compressor, Permanent Magnet Vsd Air Compressor, 15hp PM Series Screw Compressor

Send Inquiry

whatsapp

Phone

E-mail

Inquiry