11kw/15HP Permanent Magnetic Series Air Compressor for Textile

We take pleasure in an extremely fantastic standing among the our prospects for 1 Year Warranty Air Compressor 37kw, Double Screw Air Compressor, Electric Air Screw Compressor 75kw. Our company is based on the principle of 'customer first, good faith'. Under the condition of guaranteeing and protecting the interests of customers, we are enthusiastic and earnest. We have established strategic partnerships with many companies to form a high assurance and low cost product supply chain.

1.Optional setting pressure, and maintain a constant water pressure.

2.To save energy.

3.High efficiency power-saving.

4.More reliable.

5.Energy conservation and environmental protection, equipment in place, enabling immediately.

6.To reduce the noise of the air compressor.

7.Scientific development of energy saving and emission reduction.

8.Prolong the service life of air compressor.

Please pay attention to the maintenance of summer air compressor

Summer has arrived, and we should also implement high-temperature protection facilities for air compressors. In hot and humid weather, the compressor load can easily reach the peak level and lead to an increase in energy consumption. screw compressor spare parts

Here are some tips for 25 hp screw compressor system maintenance in summer:

1. Check whether the drain pipe is in good working condition. Higher humidity in summer will produce more condensate, and drains need to deal with additional water flow.

2. Remove the residue and clean the blocked cooler to prevent the compressor from overheating.

3. Clean or replace the 25 hp screw compressor filter. A dirty filter will cause pressure to drop, but a clean filter will reduce energy consumption and keep the compressor running low.

4. Properly ventilate your compressor room. Especially in summer, it is important to use ducts and vents to exhaust hot air from the outside or the compressor room.

5. If your screw compressor system uses a water-cooled compressor, please adjust the pressure, flow and temperature of the water entering the compressor to avoid overheating. screw compressor spare parts

The harm caused by the overtime use of the oil and gas separator in the air compressor

One: Overtime use will cause the oil and gas separator to age, and its work efficiency will be greatly reduced, resulting in an increase in fuel consumption, resulting in an increase in operating costs, and may even cause a main engine failure when the oil shortage is severe.

Two: Due to the reduced separation efficiency, the oil content of the compressed air outlet increases, which affects the operation of the purification equipment at the back end and causes the gas equipment to fail to work normally.

Three: The reduction of the separation efficiency may cause blockage. If the blockage is thin, the pressure will increase, which will increase the actual exhaust pressure of the unit and increase the energy consumption.

Four: After the oil and gas separator fails. The glass fiber material may fall off and fall into the oil, which will shorten the life of the oil filter element and cause the main engine to wear out.

What should be paid attention to during the operation of the air compressor?

Always check the values ??displayed on each instrument, compare the specified values ??to see if they are within the range of normal requirements;

Check the current, voltage and temperature rise of the motor in accordance with the instructions of the motor factory;

Pay attention to check the oil level in the fuel tank and check whether it is within the specified safety range;

In winter, in order to prevent the equipment from being frozen and cracked due to freezing, the cooling water in the system should be drained after the machine is stopped;

The various equipment of the machine should be checked regularly. For example, safety valves and instruments are generally checked and repaired once a year. When problems are found, they should be corrected in time;

When the machine breaks down and needs to be repaired by the staff, the machine should be stopped before proceeding;

During the operation of the machine, attention should be paid to the sound of the unit during operation. If there is noise or collision, specific measures should be taken according to the actual situation;

During maintenance, attention should be paid to check the wear of the piston guide ring, piston ring and packing seal, as well as the condition of each mating surface and friction surface.

The compressor should be started and stopped after unloading. Especially driving can only be carried out under no-load conditions. Loading after driving should be done slowly. screw compressor spare parts

We also have a number of experienced staff with rich professional knowledge and many years of production and management experience, so that our 11kw/15HP Permanent Magnetic Series Air Compressor for Textile are constantly improving. We continuously improve production efficiency, stabilize product quality and participate in primary maintenance, reduce production line downtime. Our company pays attention to the cultivation of employees' learning ability, because it enables people to improve their work efficiency and help their company achieve the expected goals.

Hot Tags: 25 hp screw compressor, China, manufacturers, suppliers, factory, customized, wholesale, in stock, Electrical Stationary Air Compressor, Hande screw compressor, Oil Filter, Stationary Regular Screw Compressor, Screw Drive Compressor 30kw Variable, Three-coil Motor Energy Saving Air Compressors