10-100HP (7.5kw- 75kw) High Performance Direct Drive Permanent Magnetic Variable Frequency Pm Motor Screw Air Compressor

Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for 350hp screw compressor, Pressure Screwair Compressor, Belt Driven Common Screw Air Compressor. Our company dedicates ourselves to achieve long-term prosperity in competitive field and future business environment. We take the lead with excellent quality, our rich production experience and strong technical force make us become a well-known manufacturer in the same industry and have successfully cooperated with many countries in the world. In order to further strengthen the construction of corporate culture, combined with the actual development of the company, we have formulated a series of plans and measures.

1. Intelligent microcomputer control technology can fully monitor and manage the whole machine under your instructions.

2. Rotary filter is easy to replace, no worry of oil leakage.

3. Adopts low temperature difference design.

4. Use high-quality and high-efficiency motors.

5. Fully enclosed and silent box design to achieve the lower noise.

Analysis of abnormal phenomenon of air compressor installation and operation

During the installation, commissioning and operation of the 10 bar compressor for sale equipment, it is necessary to conduct an in-depth analysis of the faults in the air compressor equipment, and quickly eliminate the faults to ensure the normal operation of the air compressor equipment. The following introduces some precautions during the installation and trial operation of the air compressor equipment. main compressor

In order to guarantee the quality of the project, we usually start and debug the motor and its mechanical equipment after the installation and construction of the engineering mechanical and electrical equipment is completed. During its commissioning and operation, the personnel of the construction unit are required to carry out the formal operation of the equipment, and carry out a long-term trial operation according to the conditions and requirements of formal production or formal use. Only in this way can we better test whether the design of the equipment is qualified, further verify the quality of manufacturing, installation and debugging, and verify the reliability of the continuous operation of the electromechanical equipment, so that future users can have a good explanation. However, in the process of installation and trial operation of air compressor equipment, various problems often occur. We must understand them in advance, take preventive work, and strive to deal with various abnormal phenomena in time during equipment operation to ensure that the equipment Normal operation.

Before starting the 10 bar compressor for sale, check whether its insulation resistance is qualified, check whether the secondary circuit wiring is correct, and the inside of the motor must be dry, clean, and free of debris. Observe whether the fastening bolts of the motor are loose, whether the bearing is short of oil, and whether the gap between the stator and the rotor is reasonable. Whether the setting values of fuse, contactor, circuit breaker, thermal relay, etc. are reasonable, and whether the wiring and transmission device meet the motor starting requirements. Check if there is any abnormal situation, such as the motor can not start, start slowly, abnormal sound, etc. During the start-up process, as long as abnormal phenomena are found, immediately cut off the power supply and shut down for inspection. Do not stand other people near the transmission part of the motor or on both sides of the dragging equipment, so as to prevent the rotating object from flying out and causing injury. The number of consecutive starts of the motor should not exceed 3-5 times to avoid overheating of the starting equipment and the motor. main compressor

During the operation of the air compressor, pay attention to checking whether the motor rotates flexibly, whether there is noise, whether the direction of rotation is correct; whether the power supply voltage is normal, and whether the current exceeds the rated current; check the motor shell with an electroscope to see whether there is leakage and Poor grounding phenomenon; check whether the equipment driven by the motor is working abnormally; if there is any abnormality, stop it immediately and perform operation after inspection.

We insist on quality first, customer first and sincerity as our goal, and keep developing high quality 10-100HP (7.5kw- 75kw) High Performance Direct Drive Permanent Magnetic Variable Frequency Pm Motor Screw Air Compressor for the society. Our management is intensive, which is reflected in the quality control at all levels and everyone. We are moving towards diversification and scale and strive to realize the long cherished wish of common development of the company and customers.

Hot Tags: 10 bar compressor for sale, China, manufacturers, suppliers, factory, customized, wholesale, in stock, VFD Three-phase Motor Compressor, Machine Screw Air Compresseur, PM VSD Air Compressor, 10hp 7.5kw Rotary Air Compressor, Power Saving Screw Air Compressor, Noise VPM Screw Air Compressor