How to plan ahead and avoid future problems?
I. pressure decision:
1. The higher the pressure, the greater the power consumption.The pressure drop due to the size and length of the piping should be taken into account, together with the minimum and minimum operating pressure.
2. List the operating pressure of various types of machines. If the operating pressure varies too much, air compressors with different pressures should be purchased or supercharged.
Ii. Venue:
1. It shall be wide and moisten the place with good lighting for operation and maintenance.
2. In a place with low temperature, little dust, clean air and good ventilation, the room temperature should be less than 40°C.
Iii. Model selection:
1. Calculate the total actual air capacity plus margin (the actual air discharge capacity listed in our catalog can be tested according to the asme-ptc-9 test code of the United States).
2 pay attention to the energy consumption ratio to save electricity.That is, the actual displacement (m3/min) divided by actual horsepower consumption (HP), the larger the value, the more power saving.
Iv. Compressed air quality and requirements:
The compressed air contains a lot of water, it for precision instruments, pneumatic tools, pneumatic equipment, valves, instrumentation, piping and cause great harm, because water will cause the corrosion, clogging instrument, the lower the quality of the finished product, equipment damage and loss of huge amounts of money Yu Xiuli maintenance work, so does have the necessary to add the clean compressed air compressor system.