With the development of economy, air compressor has become a necessity for the development of modern industry, and its application is more and more extensive.In the whole air compressor use cost, the purchase cost is about 13%, the maintenance cost is about 10%, and the highest cost of electricity is about 77%, the country is increasingly concerned about energy conservation, the relevant departments also require rectification, require enterprises to achieve energy conservation and emission reduction.
Screw air compressor how to do it can save energy?
1 air compressor consumes only 10% of the electrical energy into compressed air, the remaining 90% into heat energy, it can be seen that compressed air is 10 times more expensive than electricity, but we often ignore this point.In most factories, the sound of air leakage can be heard everywhere, but no one CARES about it at all. If we solve the leakage problem, we will save a lot of energy. Therefore, when we hear the sound of air leakage, we should take corresponding measures in time.
2. The waste heat recovery device can be connected to effectively use the heat generated during the operation of the unit to achieve energy conservation and emission reduction.
3, using frequency conversion control technology, can greatly reduce the power consumption.
4, according to the actual use of air volume, pressure Settings air compressor on/off.
5. Check whether there is air leakage in the air path of the equipment, and close the valve when not using air to reduce waste.
6, choose energy saving products, depending on how much pressure to meet the normal production, for example: if the pressure is at 0.3MPa can meet the production, but choose 0.7MPa that waste.In addition, pay attention to the second or third energy efficiency!