Air flow of air compressor:
The air compressor inhales air from the outside atmosphere, pre-filters through the filter screen, enters the inside of the chassis, and then filters through the air intake filter, and then enters the multi-function air intake control valve.Cleaner air then enters the motor-driven rotor to be compressed.With the rotation of the yin-yang rotor, oil is injected into the compression chamber during the compression process.After compression, oily air is expelled from the nose.Directly into the oil and gas pre-separation container, there is no pressure loss, the compressed air is buffered, the speed is rapidly reduced, the oil in the compressed air is precipitated and separated due to gravity, collision and diffusion.After the separated compressed air passes through the fine oil and gas separator, the oil content in the compressed air is only 1-2.5mg /m3.After separation, the compressed air enters the air cooler through the minimum pressure valve. After cooling by the air cooler, the compressed air flows to the user's gas tank through the compressed air outlet of the unit.
1. Proportional air inlet valve
Ø specially designed shi beside the cylinder, the adjusting range is 0 to 100%;
Ø have check function, do not need to add oil valve check valve and;
Ø equipped with mechanical exhaust valve;
2. Inversely proportional capacity regulating valve
Ø relatively general diaphragm adjustable valve, longer life, without wearing parts;
Ø the adjusting range is wide;
Ø adjust pressure steadiness;
3, pressure maintenance valve
Ø opening pressure is accurate and reliable;
Ø take check function;
Ø small pressure loss;
Ø valve core using non-metallic, there will be no action failure caused by rust;
4. Temperature control valve
Ø thermal sensitive element operation stability, effectively avoid oil work under low temperature and high temperature;
Ø oil temperature control in 70-85 ℃;
Ø valve core movement stability, no stuck misoperation fault;
5. Oil filter
Ø filtration precision 10 microns;
Ø differential pressure small;
Ø with differential pressure alarm transmission;
6. Oil separator
Ø with preliminary separation of the three layers of separation;
0.2 bar Ø differential pressure small initial pressure difference;
Ø separation effect is good, the residual oil amount for 1-3 mg/m3;
Ø high compressive strength, can bear 5 bar pressure difference
7. Universal oil for twin-screw compressor
Ø effectively reduce host leak;
Ø effectively improve the host life;
Ø coking;
8. Siemens contactor
All Ø contactor resistance capacity absorber;
Ø omron inverse protector;
Ø BURKERT electromagnetic valve;
Through the above understanding, you should have more understanding of air compressor maintenance and other related accessories, such as you have other questions, might as well contact our customer service hotline