Air compressor room location and layout and the placement of air compressor, is an important link that many manufacturers ignore, if the location is not correct will bring a lot of unexpected consequences.
the air compressor room location
1. The air compressor room should be selected in a cool, clean and well-ventilated place with the ambient temperature between 0-40℃.
2. There should be lifting equipment in the air compressor room. If no standard lifting equipment such as crane is installed, at least forklifts and gantry frames are required.Temporary lifting equipment, and the installation location of these equipment or access to the air compressor should absolutely avoid direct installation in the outdoor, so as to avoid rain and be exposed to the sun and too much dust into the unit air compressor should absolutely avoid installation in the small space without ventilation, so as to avoid the unit exhaust high temperature and other adverse conditions
Air compressor should be absolutely avoid to install in the environment where there is a lot of dust, especially near the sandblasting equipment, so as to avoid the unit too fast wear air compressor should be absolutely avoid to install in the air containing combustible gas, corrosive gas and a lot of water vapor, so as not to cause possible explosion or internal corrosion.
Air compressor room layout and air compressor placement
1. Air storage tank shall be installed behind the air compressor, and the volume of the air storage tank shall be more than 20% of the air displacement per minute of the air compressor, and personnel shall be arranged to drain water regularly.
2. If there is a dryer in the air compressor room, the air storage tank must be installed before the dryer, so that the compressed air discharged by the air compressor can be properly buffered and cooled before entering the dryer. The dryer needs a bypass valve for future maintenance.
3, the air compressor should be placed directly in the weight of the air compressor can bear the flat horizontal cement floor.
4, no special requirements, air compressor does not need to pad or install shock absorbers.
5, the air compressor and the surrounding walls or other equipment should maintain a distance of more than 1.5 m, in order to facilitate the inspection and maintenance of air compressor.