How to judge the blockage of oil and gas separator from the instrument change, the air compressor pressure, temperature and other changes are related to it.When the fault occurs, no matter how much oil is added, it is sure to be unable to flow to the system everywhere, will not be due to the lubrication effect.The result is a surge in friction, internal heat, which can trigger a series of anomalies.
Not only will the temperature change, but the pressure will increase continuously, and the excess current is also a negative problem caused by the oil blockage.In short, there is no way to air compressor normal operation.How to judge: oil pressure is increased;Current variation;Motor overload...In addition to this, the most direct way to look at it is from the control panel, which shows when a blockage does occur in the oil separator.
Of course, it doesn't take all of these phenomena to prove a blockage, either of which is likely to be caused by the current conundrum.In daily life, the filter element itself is easily damaged parts, in this regard, the spare parts should be more prepared, do maintenance or replacement records, regular maintenance, fundamentally reduce the occurrence of failure.Accurate analysis of data, so as not to have a wrong judgment, not only delay the repair speed, economic losses will be greater.How to judge the blockage of oil separator can basically be summed up as these, no matter what the cause of the shutdown, must first analyze and then implement the solution, so as to truly reduce the time.